Swimming Pool Cover Pumps
|
Back to
Winter Covers
Above Ground Cover Pumps
or In Ground Cover Pumps
ABOVE-GROUND
COVER CARE PUMP
Cover
Care Pump Models
NW200 and NW205 |
Designed for above ground pools Manufactured by Danner
this powerful pump removes water from your pool cover at the
rate of up to 500 gallons per hour.
Full submersible and clog resistant, it is designed
to remove water to within 1/8” of the surface.
Comes complete with garden hose adapter and 25-ft.
power cord. 110-120V
UL listed. 1-year
warranty.
- Easy
Maintenance - Only One Moving Part
- Uses
Half the Electricity of other Types of Pumps
- Completely
Submersible
- Uses
Standard Garden Hose Fittings
- Clog-Resistant
Pre-filter Included
- Extra-long
25' Power Cord
- Guaranteed
for 1 Full Year
|

Cover Care pump with garden hose adapter
|
Model
NW200 |
350
GPH |
$96.00
 DETAILS
|
Model
NW205 |
500
GPH |
$136.00
 DETAILS
|

Description
Little Giant small,
submersible oil-filled pump with epoxy coated cast aluminum
housing. For commercial, industrial and home applications
including statuary fountains, water displays, air
conditioners, machine tool coolants, and many other
applications where liquid must be transferred or recirculated. This compact 170 GPH pump features a 1/4"
MNPT discharge, 7' shut-off head capability, and screened
inlet. |
Permanently
Lubricated Pump Model
1-AA-18 |
Contains
non-toxic mineral oil, providing continuous lubrication for
maximum motor life. Aluminum housings best dissipate heat.
Fluid Systems Design
Parameters
170 GPH @ 1 ft.
Operates submersed.
18' cord
Epoxy-coated aluminum housing
Bottom inlet has snap-off screen for easy cleaning.
1/4" MNPT outlet, with 90° elbow accessory,
accepts 1/2" I.D. tubing.
|
|
Model
1-AA-18 |
$125.00
 DETAILS
|
Spec
Sheet
O&M
Manual
Submersible Pool Cover
Pumps
Model 1-AA-18 (500500) |
Garden
Hose adapter |
N/A
|
 |
Small
Submersible Pump Model
PE-1-PCP |
Description
Small submersible epoxy encapsulated pump for commercial,
industrial and home use. Applications include statuary
fountains, water displays, air conditioners, machine tools
and many other applications where liquid must be transferred
or recirculated. This compact 170 GPH pump features
1/4" MNPT discharge with garden hose adapter, 7'
shut-off head capability, screened inlet.
Little Giant
This popular unit has
corrosion-resistant plastic housing with a convenient inlet
screen that snaps off for easy cleaning of debris. 1/4"
MNPT outlet with garden hose adapter, 25 ft. power cord and
90 rotatable volute.
|

Model PE-1-PCP with garden hose adapter
|
Model
PE-1-PCP |
$123.00
 DETAILS
|
O & M
Manual
Pool Cover
Pumps
Model PE-1-PCP (518025) |
Pool
Cover Pump Model 5-MSP (505025) |
Description
Little Giant model 5-MSP pump includes garden
hose adapter and removable inlet screen for easy cleaning.
Lifetime oil supply. Pumps down to 1/8" (3.2 mm.).
Fluid Systems Design
Parameters
Motor - 1/6HP Shaded Pole
Maximum flow rate - 1200 GPH @ 1', 4542 LPH @ 30 cm.
Maximum Head - 26.3'...8 m
Intermittent Liquid Temp to - 120° F....49° C
Discharge - 1"FNPT (25.4 mm)
Housing - Epoxy coated cast aluminum
Volute - Nylon
Impeller - Nylon
Shaft Seal - Viton®
Shaft - Stainless Steel
Operation - Manual
Electrical - 115V, 60Hz, 5 amps, 25' (7.6m) power cord
|
|

Model 5-MSP with 25 ft. cord and garden hose adapter
included
|
Model
5-MSP |
$202.00
 DETAILS
|
Spec
Sheet
Pool Cover
Pumps
5-MSP or 505025 |
Pool
Cover Pump Model 5-APCP
(505600) |
Description
This versatile
Little Giant pump includes a stabilizing plate and automatic switch, both
of which are removable, allowing the pump to be used in a
variety of other applications. Automatic switch activates in
approximately 2-1/4" of water; "off" level is
approximately 1-1/2". Also has manual operating mode
allowing it to pump down to 1/8". Includes garden hose
adaptor. 25 ft. power cord on pump and switch.
|
|

Model 5-APCP with stabilizing plate and automatic switch
|
Model
5-APCP |
$269.00
 DETAILS
|
O&M
Manual
Pool
Cover Pumps
5-APCP or 505600 |
|
|